<![CDATA[Joe Hunt Magnetos: New Products - Parts]]> https://www.huntmagnetos.com Fri, 15 May 2026 21:54:07 +0000 <![CDATA[MSD Coil Wire #84039]]> https://www.huntmagnetos.com/products/msd-coil-wire-84039.html Mon, 25 May 2015 20:47:49 +0000 https://www.huntmagnetos.com/products/msd-coil-wire-84039.html MSD Coil Wire #84039

It is recommended that the coil wire be replaced annually as it fires four times per crankshaft revolution versus a spark plug wire that fires once every two revolutions. This MSD replacement coil wire is 18” long with 90° terminals and boots are installed on both sides to connect to ..

Price: $33.90

]]> MSD Coil Wire #84039

It is recommended that the coil wire be replaced annually as it fires four times per crankshaft revolution versus a spark plug wire that fires once every two revolutions. This MSD replacement coil wire is 18” long with 90° terminals and boots are installed on both sides to connect to ..

Price: $33.90

]]> It is recommended that the coil wire be replaced annually as it fires four times per crankshaft revolution versus a spark plug wire that fires once every two revolutions. This MSD replacement coil wire is 18” long with 90° terminals and boots are installed on both sides to connect to ..]]> <![CDATA[MSD Plug Wire Numbers #3414]]> https://www.huntmagnetos.com/products/msd-plug-wire-numbers-3414.html Mon, 25 May 2015 14:38:27 +0000 https://www.huntmagnetos.com/products/msd-plug-wire-numbers-3414.html MSD Plug Wire Numbers #3414

These MSD cylinder markers markers will save you time and ensure that the plug wires are always in the right place. They are also built to withstand high underhood temperatures. The Markers are also supplied on a trick tool that makes installation effortless.

Price: $21.14

]]> MSD Plug Wire Numbers #3414

These MSD cylinder markers markers will save you time and ensure that the plug wires are always in the right place. They are also built to withstand high underhood temperatures. The Markers are also supplied on a trick tool that makes installation effortless.

Price: $21.14

]]> These MSD cylinder markers markers will save you time and ensure that the plug wires are always in the right place. They are also built to withstand high underhood temperatures. The Markers are also supplied on a trick tool that makes installation effortless.

]]> <![CDATA[Heavy Duty Band Clamp #26041A]]> https://www.huntmagnetos.com/products/heavy-duty-band-clamp-26041a.html Fri, 26 Dec 2014 18:42:20 +0000 https://www.huntmagnetos.com/products/heavy-duty-band-clamp-26041a.html Heavy Duty Band Clamp #26041A

Genuine Mallory heavy duty stainless steel quick release band clamp. Band clamp makes it quick and easy to remove the generator portion of your magneto.

Fits both 4&8 cylinder magnetos for the following models:
Price: $64.30

]]> Heavy Duty Band Clamp #26041A

Genuine Mallory heavy duty stainless steel quick release band clamp. Band clamp makes it quick and easy to remove the generator portion of your magneto.

Fits both 4&8 cylinder magnetos for the following models:
Price: $64.30

]]> Genuine Mallory heavy duty stainless steel quick release band clamp. Band clamp makes it quick and easy to remove the generator portion of your magneto.

Fits both 4&8 cylinder magnetos for the following models:
<![CDATA[Replacement Bushings]]> https://www.huntmagnetos.com/products/replacement-bushings.html Thu, 24 May 2012 22:11:21 +0000 https://www.huntmagnetos.com/products/replacement-bushings.html Replacement Bushings

Replace your worn base bushings so that optimum gear life and timing can be achieved. These are replacement self-lubricating bushings for magneto and distributor bases. The bushings are Oilite units that are constructed of bronze with small particles of graphite for lubrication. Please select y..

Price: $6.80

]]> Replacement Bushings

Replace your worn base bushings so that optimum gear life and timing can be achieved. These are replacement self-lubricating bushings for magneto and distributor bases. The bushings are Oilite units that are constructed of bronze with small particles of graphite for lubrication. Please select y..

Price: $6.80

]]> Replace your worn base bushings so that optimum gear life and timing can be achieved. These are replacement self-lubricating bushings for magneto and distributor bases. The bushings are Oilite units that are constructed of bronze with small particles of graphite for lubrication. Please select y..]]> <![CDATA[MSD Square Drive Adapter]]> https://www.huntmagnetos.com/products/msd-square-drive-adapter.html Wed, 23 May 2012 12:20:26 +0000 https://www.huntmagnetos.com/products/msd-square-drive-adapter.html MSD Square Drive Adapter

This is a replacement drive that joins the bottom of the magnet rotor to the top of the base assembly on MSD magnetos. Replacing this unit on a regular basis will help keep optimum spark timing in your MSD magneto.

Price: $11.15

]]> MSD Square Drive Adapter

This is a replacement drive that joins the bottom of the magnet rotor to the top of the base assembly on MSD magnetos. Replacing this unit on a regular basis will help keep optimum spark timing in your MSD magneto.

Price: $11.15

]]> This is a replacement drive that joins the bottom of the magnet rotor to the top of the base assembly on MSD magnetos. Replacing this unit on a regular basis will help keep optimum spark timing in your MSD magneto.

]]> <![CDATA[MSD Rotor]]> https://www.huntmagnetos.com/products/msd-rotor.html Wed, 23 May 2012 12:19:29 +0000 https://www.huntmagnetos.com/products/msd-rotor.html MSD Rotor

This is a factory replacement rotor from MSD. Rotors should be checked often for play by taking the magneto out and twisting the gear and rotor in opposite directions. If movement is felt and cannot be fixed by tightening the rotor bolt, then the unit should be replaced. This replacement rotor ..

Price: $26.50

]]> MSD Rotor

This is a factory replacement rotor from MSD. Rotors should be checked often for play by taking the magneto out and twisting the gear and rotor in opposite directions. If movement is felt and cannot be fixed by tightening the rotor bolt, then the unit should be replaced. This replacement rotor ..

Price: $26.50

]]> This is a factory replacement rotor from MSD. Rotors should be checked often for play by taking the magneto out and twisting the gear and rotor in opposite directions. If movement is felt and cannot be fixed by tightening the rotor bolt, then the unit should be replaced. This replacement rotor ..]]> <![CDATA[Thrust Washer]]> https://www.huntmagnetos.com/products/thrust-washer.html Sun, 07 Aug 2011 20:46:41 +0000 https://www.huntmagnetos.com/products/thrust-washer.html Thrust Washer

This is the steel thrust washer that goes between the gear and base assembly. This can be worn out some times due to the magneto not being properly indexed leading to no clearance between the gear, washer and base leading to debris running through the engine and improper tolerances.

Price: $2.90

]]> Thrust Washer

This is the steel thrust washer that goes between the gear and base assembly. This can be worn out some times due to the magneto not being properly indexed leading to no clearance between the gear, washer and base leading to debris running through the engine and improper tolerances.

Price: $2.90

]]> This is the steel thrust washer that goes between the gear and base assembly. This can be worn out some times due to the magneto not being properly indexed leading to no clearance between the gear, washer and base leading to debris running through the engine and improper tolerances.

]]>